Felix 3d printer

From Utrecht in Netherlands comes Felix 3d printer in version 3.0. MAKE magazine awarded the Felix v2.0 with the title Surprisehit of 2014.

Felix v3.0 3d printer in single and dual extruder versions

Felix is priced from: €1,499.00 to: €1,648.50 depending on specifications and options.

Felix 3d printer v3.0 technical specifications:

The benefits:

• More reliable printing. Print your objects with more precision

• Higher quality at higher speeds. Due to increased stiffness of parts, higher accelerations are possible.

• Machine safety. The assembled printer meets the CE safety regulations.

• Optional dual extrusion. Print your objects with two colors or with special water soluble support material. This option is somewhat experimental. The mechanics is ready, but software requires some further development.

• Last but not least, you can upgrade your own printer to the latest revision. Upgrade kits will be available

Specifications:

• Power max 220W

• Voltage 110-240V, automatically adjusting powersupply

• Nozzle diameter 0.35mm

• Build volume (x, y, z) (255, 205, 235) mm, When printing where dual extrusion is required, the buildvolume reduces to 240mm. But when printing with a dual head and only using one of the two nozzles the x range is 255

• Layer height 50 micron to 300 micron

• Heated bed temperature range 0 - 95 degC, When isolating bottom temp can go upto 115 degC. Ultra light aluminum sandwich plate.

• Nozzle temperature range 0- 275degC

• Axes positioning resolution (x, y, z) (50,50,10) micron

• Display unit 20x4 character display, for assembled printer this is standard included. 

• Stand alone printing MicroSD card reader integrated into electronics board. So stand-alone printing is possible even without the display unit

The printer is designed in the following modules:
Frame module:

• Extruded aluminum frame parts

• Easy connectors, the frame is assembled by just screwing 6 hex bolts

X (moving head) and Y (moving table) module:

• Linear ball bearing

• Printed parts

• Toothbelt

• Pulley

• Opto-sensor

• NEMA 17 motor

• Heated bed

Z-axis module:

• Linear ball bearing

• Printed parts

• Precision machined trapezium lead screw with bronze nut

• Opto-sensor

• NEMA 17 motor 

Extruder/Hot-End module: (this is multiplied by two when you have a dual extruder printer)

• Hot End

• 2x Fan

• NEMA 17 motor 

Electronics module:

• FELIXprinters electronics

• 3x opto-sensors

• 1.8m USB cable

• Power cable

• Display Unit included

Miscelleaneous parts:

• Tie wraps

• Bolts and nuts

• Handle

• 12V 250W Powersupply FlexATX

Company page:

http://shop.felixprinters.com/printer-kits.html